LONEX Электромотор AEG A1 Infinite тяговый оборотистый (средний)

Серия Титан. Тяговый высоко оборотистый электромотор для страйкбольных приводов AEG, пружины M130-M170. 

LONEX Электромотор A1 Infinite Torque-Up & High Speed AEG (средний )

LONEX A1 Infinite Torque-Up & High Speed AEG Motor ( Medium )

- Extremely tough motor axle

- Dimpled armature for weight balance

- Heat resistant enameled wire up to 200℃

- Glued wire to withstand high temperature and speed, prevent loosening

- High conductive motor brush and commutator

- Equipped with steel pinion gear

- Heat resistant high performance rare-earth magnet

- Ball bearings inside metal case and nylon end bell

- Machined aluminum bushing with ball bearings

NOTE:Not recommended using setups of springs with ratings below M120SP, the high speed/torque nature of the motor may cause damage to internal parts of the gearbox.

GB-05 motor series using heat resistance enameled wire, up to 200℃, 
to build the core of the motor. This helps the motor to maintain the temperature at an efficient level, even under the full power, also it greatly increases the durability of the motor and battery consumptions. 
A set of ball bearings are installed at both ends of the motor, not only improves the rotations but also further improves the energy consumption. 
The front end of the motor has an aluminum cage to improve the rotations, and a high durability nylon cover at the rear end to withstand the high temperature and extreme wear of the motor. 
Lastly, the motor pinion gear uses high density steel that can endure the extreme rotation and pressure under high torque or high speed set up. 

Installation Warning: 

  LONEX A1 、 A2 、 A3 motors are designed for high speed and high torque AEG setups. 

  Using 100 M / S or below setups will damage the internal parts of the gearbox. 

  Please seek professional aids when installing the motors.

Расчет доставки осуществляется после упаковки и взвешивания посылки. Доставка осуществляется преимущественно СДЭК, в редких случаях Почтой РФ. Привода отправляются наземным маршрутом СДЭК. Почтой не отправляются.

Шары в ящиках можно отправить грузовыми компаниями, к примеру, Энергией, ДЛ, и другими.